Warning: Prepare suitable containers to collect fluid and take measures to protect surrounding components from contact with brake fluid.
Removal of brake pipelines
1. Place the vehicle on a two post lift.
2. Install a spacer on the brake pedal to limit the flow of brake fluid.
3. Unscrew the connections of the brake hoses with the brake pipelines (1).
4. Unscrew the connection of the th pipeline with the working cylinder (2).
Left brake pipe
Right brake pipeline
5. Unhook the brake pipe from the rear axle beam (3) and remove from the vehicle.
Installation of brake pipelines
Note: Replace the brake pipe holders with new ones after each removal.
1. Install the brake lines in their original positions.
2. Hook the brake pipes into the holders of the rear axle beam.
3. Bait without tightening:
- connections of brake pipelines with working brake cylinders;
- connections of brake pipelines with back brake hoses.
4. Tighten the brake line connections to 14 Nm.
5. Remove the spacer from the brake pedal.
6. Bleed the hydraulic circuit of the brake system.