Useful tips for a car driver Renault Logan 1

Selecting motor oil
When choosing motor oil, you should first of all be guided by the recommendations and requirements of the manufacturer regarding the quality and manufacturer of motor oil. Modern motor oils, consisting of base oils and...

Selection of plastic lubricants
Plastic lubricants are used to reduce friction and, as a result, to reduce wear of parts in vehicle units where it is impossible or impractical to create oil circulation. Plastic lubricant easily penetrates into the...

Selecting a Coolant
It is recommended to fill the cooling system of Renault Logan cars with a low-freezing liquid - antifreeze - an aqueous solution of ethylene glycol with the addition of additives and neutral dye. In concentrated form,...

Selecting brake fluid
According to the operating instructions, brake fluids that comply with the international DOT-4 class and are designed for use in vehicles with increased dynamic characteristics are used in the brake system of your...

Selecting a fine fuel filter
Gasoline poured into the fuel tank may contain water, dirt, metal particles, rust, which, if the fuel is not cleaned, lead not only to contamination of the engine fuel system, but also to wear of the fuel equipment, and...

Choosing an air filter
The air filter, installed in the central part of the engine compartment, serves to clean the air entering the intake pipe. It must meet the following requirements: effectively trap particles that pollute incoming air;...

Engine lubrication system oil filter
The oil filter installed in the engine lubrication system serves to clean the engine oil. It must meet the following requirements: accumulate and retain metal-containing and carbon-containing particles that form in...

Trip to the service station
Sooner or later in the life of every car enthusiast there comes a moment when it is necessary to contact a car service center to carry out qualified or technically complex repairs ( see table 4.1 ). It is necessary to...

How to prepare your car for winter
A serviceable car does not require "winter" preparation. For operation in the northern regions of the country and large cities, it is only recommended to carry out a number of control and inspection measures and special...

Recommendations for starting the engine in severe frost
The main problem in winter is starting a cold engine. It most often occurs with carburetor engines, but in severe frost, the owner of a car with an injection engine can also face it. The reasons are known: thickened...

What is useful to buy for winter
1. A bottle of universal protective lubricant such as WD-40. 2. A special lock de-icer such as "liquid key" or, as a last resort, a disposable lighter. 3. Glass defroster for removing snow and ice crust. 4. Antifreeze...

Useful winter tips
If you have installed a radiator insulator, don't forget about it when you get stuck or there is a sudden thaw outside (this has been happening quite often lately) or spring has come - otherwise the engine can overheat...

Recommendations for preparation for technical inspection
During the annual state technical inspection (GTO) of a vehicle, each car owner (or to a person using the car under a power of attorney) the following documents must be presented: personal passport or identity card and...

List of faults and conditions under which operation of vehicles is prohibited
Extract from the Appendix to the "Basic Provisions for the Admission of Vehicles to Operation and the Duties of Officials to Ensure Road Safety". 1. Brake systems. 1.1. During road tests, the following standards of...

Changes to state standards on maximum permissible content of harmful substances
Since January 1, 2000, Amendment No.1 to GOST 17.2.2.03–87 "Environmental Protection. Atmosphere. Standards and Methods for Measuring the Content of Carbon Monoxide and Hydrocarbons in Exhaust Gases of Vehicles with...

Safety precautions during repair work
1. Any repair and maintenance work on the vehicle must be carried out in a spacious, well-ventilated and well-lit area. 2. Workshop equipment (lifting mechanisms, machine tools, power tools) must be specially adapted...

Safe car lifting
To safely lift a vehicle with a jack, you must do the following. 1. Place the vehicle on a level, hard surface. 2. Before lifting, free the car from foreign objects. Remove everything necessary for repair from the trunk...

Basic and special tools
When carrying out repairs or on a long journey, especially if the route is unfamiliar, you have to rely only on yourself and the tools in the trunk. A good tool is the key to a successful repair. A high-quality tool...

Pre-Work Activities
In order for repair or maintenance work on your vehicle to be carried out most effectively, you must follow these simple rules. 1. Tidy up your workspace; remove all bolts, nuts and other small parts left over from the...

Restoration of threaded connections
Almost all car repair operations involve loosening nuts, bolts and screws. Over time, threaded connections rust, become corroded, bolt and nut faces become damaged, screw splines become stripped and loosening becomes a...

Auto Body Repair Tips
Very often damage occurs to the paintwork of a car (chips, scratches, etc.), which cannot be removed by polishing. In this case, you need to do the following. 1. Clean the damaged paintwork areas down to the metal...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ General information: Practical advice Renault Sandero 1 (2007-2012, petrol)
➽ User manual: Practical Tips Renault Duster 1 (2009-2017)

Link to this section in different formats

TEXTHTMLBB Code