Share with friends:
Doors, locks and windows of the car Renault Logan 1
Removal and installation the front door trim
You will need a TORX T20 key. 1. Remove the front door lock actuator inner handle (see "Replacing the inner handle of the front door lock drive" ). 2. Remove the speaker from the acoustic system (see "Removing and...
You will need a TORX T20 key. 1. Remove the front door lock actuator inner handle (see "Replacing the inner handle of the front door lock drive" ). 2. Remove the speaker from the acoustic system (see "Removing and...
Front door glass replacement
You will need TORX T20 and T30 keys. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Lower the glass completely and remove its inner seal. 3. Raise the glass so that the window...
You will need TORX T20 and T30 keys. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Lower the glass completely and remove its inner seal. 3. Raise the glass so that the window...
Replacing the front door window regulator
You will need a 10 mm wrench. 1. Remove the front door glass (see "Replacing the front door glass" ). Note: It is not necessary to remove the glass from the door, it is enough to disconnect it from the window lifter and...
You will need a 10 mm wrench. 1. Remove the front door glass (see "Replacing the front door glass" ). Note: It is not necessary to remove the glass from the door, it is enough to disconnect it from the window lifter and...
Replacing the front door outer handle
You will need a 10 mm wrench. 1. Raise the glass and remove the front door trim (see "Removing and installing the front door trim" ). 2. Unfasten the retainer (shown in the photo by the arrow) outer handle rods and...
You will need a 10 mm wrench. 1. Raise the glass and remove the front door trim (see "Removing and installing the front door trim" ). 2. Unfasten the retainer (shown in the photo by the arrow) outer handle rods and...
Replacing the inner handle of the front door lock drive
You will need a TORX T27 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...
You will need a TORX T27 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...
Replacing the front door lock switch
You will need: all the tools necessary to remove the front door trim, and pliers. 1. Raise the glass and remove the front door trim (see "Removing and installing the front door trim" ). 2. Unfasten the retainer (shown...
You will need: all the tools necessary to remove the front door trim, and pliers. 1. Raise the glass and remove the front door trim (see "Removing and installing the front door trim" ). 2. Unfasten the retainer (shown...
Replacing the front door lock
You will need: all the tools necessary to remove the trim and glass of the front door, as well as TORX T30 and T40 keys. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Remove the...
You will need: all the tools necessary to remove the trim and glass of the front door, as well as TORX T30 and T40 keys. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Remove the...
Replacing the front door opening limiter
You will need: all the tools necessary to remove the front door trim, as well as a TORX T40 key and a 10 mm socket head. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Remove the...
You will need: all the tools necessary to remove the front door trim, as well as a TORX T40 key and a 10 mm socket head. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2. Remove the...
Removal and installation the front door
You will need: all the tools necessary to remove the upholstery and the front door opening limiter, as well as a 13 mm spanner. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2....
You will need: all the tools necessary to remove the upholstery and the front door opening limiter, as well as a 13 mm spanner. 1. Remove the front door trim (see "Removing and installing the front door trim" ). 2....
Removal and installation the rear door trim
You will need a TORX T20 key. 1. Remove the inner handle of the rear door lock actuator (see "Replacing the inner handle of the rear door lock drive" ). 2. Remove the window lift handle by pulling it towards you,...
You will need a TORX T20 key. 1. Remove the inner handle of the rear door lock actuator (see "Replacing the inner handle of the rear door lock drive" ). 2. Remove the window lift handle by pulling it towards you,...
Rear door glass replacement
You will need: all the tools necessary to remove the rear door trim and a TORX T20 key. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Lower the glass completely and remove its inner...
You will need: all the tools necessary to remove the rear door trim and a TORX T20 key. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Lower the glass completely and remove its inner...
Replacing the rear door window regulator
You will need: all the tools necessary to remove the upholstery and glass of the rear door, and a 10 mm spanner. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Remove the front door...
You will need: all the tools necessary to remove the upholstery and glass of the rear door, and a 10 mm spanner. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Remove the front door...
Replacing the outer rear door handle
You will need: all the tools necessary to remove the rear door trim, and a 10 mm wrench. 1. Raise the glass and remove the rear door trim (see "Removing and installing rear door trim" ). 2. Unscrew the two nuts securing...
You will need: all the tools necessary to remove the rear door trim, and a 10 mm wrench. 1. Raise the glass and remove the rear door trim (see "Removing and installing rear door trim" ). 2. Unscrew the two nuts securing...
Replacing the inner handle of the rear door lock actuator
You will need a TORX T20 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...
You will need a TORX T20 key. 1. Remove the screw securing the inner handle of the door lock drive. 2. Remove the handle from the socket in the upholstery and, having disconnected the drive rod from its lever, remove...
Replacing the rear door lock
You will need: all the tools necessary to remove the trim and glass of the rear door, as well as TORX T30 and T40 keys, a flat-blade screwdriver. 1. Remove the rear door trim (see "Removing and installing rear door...
You will need: all the tools necessary to remove the trim and glass of the rear door, as well as TORX T30 and T40 keys, a flat-blade screwdriver. 1. Remove the rear door trim (see "Removing and installing rear door...
Replacing the rear door opening limiter
You will need: all the tools necessary to remove the rear door trim, as well as a TORX T30 key, a 10 mm socket head. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Remove the screw...
You will need: all the tools necessary to remove the rear door trim, as well as a TORX T30 key, a 10 mm socket head. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Remove the screw...
Removal and installation the rear door
You will need: all the tools necessary to remove the trim and the rear door opening limiter, and a 13 mm spanner. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Disconnect the door...
You will need: all the tools necessary to remove the trim and the rear door opening limiter, and a 13 mm spanner. 1. Remove the rear door trim (see "Removing and installing rear door trim" ). 2. Disconnect the door...
Replacing trunk lid springs
The trunk lid is held open by two cylindrical springs acting on the lid hinges. No tools are required for their removal and installation. 1. Open the trunk lid, lift it as high as possible and place it on a suitable...
The trunk lid is held open by two cylindrical springs acting on the lid hinges. No tools are required for their removal and installation. 1. Open the trunk lid, lift it as high as possible and place it on a suitable...
Removal and installation the trunk lid
You will need a 10 mm wrench. 1. Open the trunk lid and place it on a suitable support or have an assistant support it. 2. Remove both trunk lid springs (see "Replacing the trunk lid springs" ). Note: If you are...
You will need a 10 mm wrench. 1. Open the trunk lid and place it on a suitable support or have an assistant support it. 2. Remove both trunk lid springs (see "Replacing the trunk lid springs" ). Note: If you are...
Replacement of the trunk lid lock and latch
You will need TORX T30 and T40 keys. 1. Open the trunk lid. 2. Remove the two screws securing the lock to the cover panel... 3. ...move the lock down... 4. ...disconnect the switch rod from the lock lever and remove the...
You will need TORX T30 and T40 keys. 1. Open the trunk lid. 2. Remove the two screws securing the lock to the cover panel... 3. ...move the lock down... 4. ...disconnect the switch rod from the lock lever and remove the...
Replacing the trunk lid lock switch
You may need pliers. 1. Open the trunk lid. 2. Grasp the bent edge of the switch spring clip through the mounting window in the trunk lid reinforcement (it is more convenient to do this with pliers), remove the retainer...
You may need pliers. 1. Open the trunk lid. 2. Grasp the bent edge of the switch spring clip through the mounting window in the trunk lid reinforcement (it is more convenient to do this with pliers), remove the retainer...
Removal and installation the fuel tank filler pipe hatch cover
You will need a TORX T30 key. 1. Open the fuel tank filler cap... 2. ...unscrew the two screws securing the cover... 3. ...and remove the cover. 4. Install the filler cap in the reverse order of removal. Before...
You will need a TORX T30 key. 1. Open the fuel tank filler cap... 2. ...unscrew the two screws securing the cover... 3. ...and remove the cover. 4. Install the filler cap in the reverse order of removal. Before...
Replacement of fixed body glazing
The windshield and rear window glass are glued into the body openings. They are replaced using the same techniques, so the work is shown using the windshield as an example. You will need: a flat-blade screwdriver, an...
The windshield and rear window glass are glued into the body openings. They are replaced using the same techniques, so the work is shown using the windshield as an example. You will need: a flat-blade screwdriver, an...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Other sections on other Renault models
➽ Body and interior: Doors, locks and windows Renault Symbol 1 (1999-2008, petrol)
➽ Body and interior: Doors, locks and windows Renault Sandero 1 (2007-2012, petrol)
➽ Body and interior: Doors, locks and windows Renault Kangoo 1 (1997-2007)
➽ Body and interior: Doors, locks and windows Renault Scenic 1 (1996-2003)
➽ Body and interior: Doors, locks and windows Renault Espace I and II (1984-1996)
➽ Body and interior: Doors, locks and windows Renault Clio 1 (1990-1998)
Link to this section in different formats
TEXTHTMLBB Code
- General information
- Faults en route
- Daily checks
- Governing bodies
- Maintenance
- Power unit
- Petrol engines 1.2 l
- Petrol engines 1.6 l
- Diesel engines 1.5 l
- Cooling system
- Lubrication system
- Power and control system
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis, running gear
- Suspension and wheels
- Brake system
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Safety system
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Wiring diagrams (sedan)
- Wiring diagrams (wagon)
- General information
- Vehicle device
- User manual
- Faults en route
- Daily maintenance
- First maintenance
- Second maintenance
- Driver tips
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Power and exhaust system
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Body Care
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits