You will need TORX T20 and T30 wrenches.
1. Remove the front door upholstery (see «Removal and installation of an upholstery of a forward door»).
2. Fully lower the glass and remove its inner seal.
3. Raise the glass until the power window slider is positioned against the service window in the door panel. While holding the glass, unscrew the two screws securing its clip to the slider...
4.... and remove the glass from the door by pulling it up.
5. If it is necessary to replace the front door glass guide, unscrew the guide fastening screw at the end of the door...
6.... and remove the guide from the door through the technological window in its inner panel.
7. Establish glass of a forward door and all removed details in an order, the return to removal.