Car clutch repair Renault Logan 2

Car Clutch — General Information
The clutch is dry, single-disk. In different versions, a cable or hydraulic clutch release drive can be used. Cable operated clutch: 1. Clutch drive cable 2. Clutch release saw 3. Sleeve stop 4. Manual gearbox. 5....

Precautions during repair
Before removing the driven clutch disc, check Correct installation of the clutch slave disc. Before installing the clutch, check Flywheel surface under the driven clutch disc (no scratches or traces of tarnish)....

Clutch pedal
Versions with cable release drive 1. Clutch cable 2. Clutch pedal 3. Clutch pedal pad Removal the clutch pedal Remove the clutch cable from the thrust sleeve (1) to relieve the tension on the cable. 2. Remove the lower...

Cable clutch drive
1. Clutch cable. 2. Drive cable holder. 3. Drive cable bracket. 4. Double pipe holder. 5. Drive cable bushing support. 6. Bolt. 7. Drive cable bushing. Removal 1. Remove the engine protective pan. 2. Remove the left...

Hydraulic clutch drive
1. Clutch master cylinder. 2. Clutch slave cylinder. 3. Pipe holder. 4. Pipe bracket. Bleeding the clutch hydraulic drive The procedure for bleeding the clutch hydraulic drive is performed after any work on the clutch...

Clutch master cylinder
Caution: Brake fluid may leak out when the line is disconnected. Take appropriate measures to protect surrounding components. Removal the clutch master cylinder 1. Place the vehicle on a two-post lift. 2. Unscrew the...

Clutch hydraulic line
Removal the clutch hydraulic line 1. Place the vehicle on a two-post lift. 2. Loosen the mounting bolts and remove the engine protective pan. 3. Remove the engine air filter unit. 4. Disconnect the level sensor...

Clutch discs
Removal the clutch discs 1. Place the vehicle on a two-post lift. 2. Remove the manual transmission from the vehicle. 3. Fix the flywheel using special tool Mot. 582-01 (3). 4. Loosen the clutch pressure plate bolts and...

Flywheel — removal and installation
Removal the flywheel 1. Place the vehicle on a two-post lift. 2. Remove the manual gearbox and clutch discs. 3. Secure the flywheel using locking tool Mot. 582-01 (1). 4. Loosen the flywheel mounting bolts. 5. Remove...

Special tools and devices
Name of tools and devices Catalogue number Set of centering rods for clutch discs Emb. 1780 Flywheel locking device Mot. 582- 01 Flywheel locking device Mot. 1431 Socket (24 mm) for removing/installing the clutch master...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Transmission: Clutch Renault Clio 1 (1990-1998)
➽ Transmission: Clutch Renault Kangoo 1 (1997-2007)
➽ Transmission: Clutch Renault Megane 1 (1995-2002)
➽ Transmission: Clutch Renault Duster 1 (2009-2017)
➽ Transmission: Clutch Renault Sandero 1 (2007-2012, petrol)
➽ Transmission: Clutch Renault Espace III (1996-2002)

Link to this section in different formats

TEXTHTMLBB Code