Exterior (external body parts) Renault Logan 1

Features of the body design
The body of Renault Logan cars of the four-door sedan type, load-bearing structure, all-metal. The body frame includes the base, sidewalls, roof and parts connected to each other by electric welding (point, seam and...

Possible bodywork faults
Possible body malfunctions, their causes and methods of elimination

Removal and installation the front bumper
You will need: a flat-blade screwdriver, 10 mm keys and a TORX T30. 1. Remove three screws securing the front bumper and the lower part of the engine splash guard on the right... 2. ...and on the left, remove both lower...

Removal and installation the rear bumper
You will need: a 10 mm socket head, TORX T20 and T30 keys, and a flat-blade screwdriver. 1. On the left and right sides of the car, unscrew two screws that simultaneously secure the ends of the bumper and the rear...

Removal and installation the radiator grille
The radiator grille is made as a single piece with the front bumper, and if damaged, can only be replaced together with it (see "Removing and installing the front bumper" ).

Removal and installation wheel mudguards and fender liners
In the front wheel arches and in the rear part of the rear wheel arches, plastic mudguards are installed, protecting the body from the abrasive effects of sand and stones thrown by the wheels. Mudguards are installed...

Removal and installation the front wing
You will need: all the tools needed to remove the mudguard and front fender liner (see "Removal and installation of wheel mudguards and fender liners" ), front bumper (see "Removing and installing the front bumper" ),...

Removal and installation the air intake box grille
You will need a flat-blade screwdriver. 1. Open the hood and place it on the support. 2. Remove the rear hood seal from the front shield flanging. 3. Remove the windshield washer hose from the holder on the air intake...

Removal and installation the hood
You will need a 10 mm wrench. Note: The hood is quite heavy and bulky, so remove and install it with an assistant. 1. Open the hood and place it on the support. 2. Remove the windshield washer hose from one... 3. ...and...

Removal, installation and adjustment of the hood lock and drive
The hood lock, combined into one unit with a safety hook, is installed on the upper shelf of the radiator frame. The lock latch, made in the form of a bracket from thick steel wire, is welded to the reinforcement of the...

Removal and installation the outside rearview mirror
Note. Removal and installation of the outside rearview mirror are shown using the left mirror as an example, the right mirror is removed in a similar way. The right and left outside mirrors are identical in design. You...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Exterior (external elements) Renault 19 (1988-1996)
➽ Body and interior: Exterior (external elements) Renault Laguna 2 (2001-2007)
➽ Body and interior: Exterior and interior Renault Kangoo 1 (1997-2007)
➽ Body and interior: Exterior (external elements) Renault Symbol 2 (2008-2013, petrol)
➽ Body and interior: Exterior (external elements) Renault Clio 1 (1990-1998)
➽ Body and interior: Exterior (external elements) Renault Sandero 1 (2007-2012, petrol)

Link to this section in different formats

TEXTHTMLBB Code