1. Remove three screws at the same time securing the front bumper and the lower part of the engine mudguard, on the right...
2....and on the left, remove both lower mudguards (see «Removal and installation of mudguards and engine crankcase protection»).
3. Prying off with a screwdriver, remove one piston of the bumper brackets to the body on the left and right.
4. Turn out three screws of fastening of a bumper to a stretcher...
5....two screws each (left and right) fastening the bumper to the front fenders and the body in the front wheel arches...
6....and from below the car.
7. Turn out four screws of fastening of facing to a radiator frame...
Note. The radiator cover is made in one piece with the front bumper.
8.... and remove the front bumper.
9. Install the front bumper and all removed parts in the reverse order of removal.