You will need a flat blade screwdriver.
1. Open the hood and place it on the stop.
2. Remove the rear seal of the hood from the flanging of the bulkhead shield.
3. Remove the windshield washer hose from the holder on the air intake grille...
4....from one...
5....and a second hose holder on the inner panel of the hood...
6.... and disconnect the hose from the tee.
7. On both sides of the car, unscrew the latches of the two grille clips...
8.... and, prying with a screwdriver...
9.... remove the caps from the openings of the body and grille.
10. Remove the right half of the grille by passing the windshield washer hose through its hole...
11....and the left half.
12. Install the air intake grille and all removed parts in the reverse order of removal.