Removing
Disconnect the wires from the battery terminals, starting with the negative terminal.
Remove the intake silencer.
Disconnect the brake booster vacuum hose 1 from the intake manifold.
Attention! Take care not to damage the suction pipe on the intake manifold. If the pipe is damaged, the manifold must be replaced.
Remove the mounting bracket 2 oxygen sensor connectors and air filter.
Turn away bolts 3 fastenings of the case of the air filter.
Remove the air filter housing to the right.
Installation
Install in the reverse order of removal.
Torque tighten the air filter housing bolts: 9 Nm.