Removing
Disconnect the battery.
Disconnect the fuse box by depressing the latches at points 1. Move the fuse box aside.
Disconnect;
- block of wires from the air temperature sensor 2.
- crankcase ventilation pipe 3.
Remove air tube 4.
Disconnect tabs 5 and 6. Remove the air filter.
Attention! If the filter is in the wrong position in the housing, unfiltered air will enter the engine.
Installation
Install the air filter.
Fix tabs 5 and 6 with clamps.
Install air duct 4.
Attach:
- crankcase ventilation pipeline 3;
- wiring harness to air temperature sensor 2.
Set the fuse box to 1.
Connect the battery.