Interior (internal body elements) Renault Logan 1

Removal and installation the front seat
You will need a TORX T40 key. 1. Move the seat back. 2. Remove the two bolts securing the front seat runners to the body base and slide the seat forward. 3. Remove the two bolts securing the rear runners... 4. ...and...

Removal and installation the front seat headrest
The process of removing the front seat headrest is described in Section 1 "The structure of a car" (cm. "Seats" ).

Removal and installation the rear seat
You will need a 13 mm wrench. 1. Fold the rear seat cushion forward. 2. Remove the cushion retainers from the holes in the body base... 3. ...and remove the rear seat cushion from the vehicle interior. 4. Remove the two...

Removal and installation the floor tunnel lining
You will need: TORX T20 key, 10 mm socket head, flat-blade screwdriver. 1. Disconnect the wire from the negative terminal of the battery. 2. Using a screwdriver, pry off the plug from the rear end of the floor tunnel...

Description of the design of the passive safety system (SRS)
The passive safety system (SRS) of the Renault Logan combines front airbags for the driver and front passenger and seat belts for the driver and all passengers. The cars are equipped with a front airbag for the driver...

Removal and installation the driver's airbag
The driver's airbag must be removed when repairing the steering components and electrical equipment of the vehicle, so the process of its removal and installation is described in this manual. However, to avoid injury,...

Replacing the front seat belt
Note: The front seat belt replacement is shown using the driver's seat belt as an example. The front passenger seat belt is replaced in the same way. You will need: TORX keys T20 and T40, "16", "17". 1. If the seat...

Replacing the rear seat belt
You will need: TORX T40 keys, "16", "17". 1. Remove the rear seat cushion and backrest (see "Removing and installing the rear seat" ). 2. Unscrew the bolts securing the rear seat belt locks to the body base and remove...

Removal and installation of the electronic control unit of the passive safety system
You will need: all the tools necessary to remove the field tunnel lining, and a 10 mm spanner. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the floor tunnel lining (see "Removal and...

Removal and installation the interior rearview mirror
The interior rearview mirror is mounted on a bracket glued to the inside of the windshield glass. If necessary, the mirror can be removed without using tools in two ways. With the first method... ...move the mirror ball...

Removal and installation the instrument panel
You will need: TORX T20 key, flat-blade screwdriver. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the steering wheel (see "Removing and installing the steering wheel" ). 3. Remove the...

Features of the heater and air conditioner
In the Renault Logan, the interior heating and ventilation system is controlled independently from the air conditioning system when performing the function of interior heating and ventilation, removing frost and...

Removal and installation the heater radiator
You will need: TORX T20 and 13 keys. 1. Drain the cooling system (see "Replacing the coolant" ). 2. Remove the lower instrument panel trim (see "Removing and installing the instrument panel" ). 3. Bend back the edge of...

Removal and installation the heating and air conditioning control unit
You will need: TORX T20 key, flat-blade screwdriver. 1. Disconnect the wire from the negative terminal of the battery. 2. Remove the central instrument panel trim (see "Removing and installing the instrument panel" )....

Replacing handrails
You will need: TORX T20 key, flat-blade screwdriver. Note: The replacement is shown using the example of the left rear handrail; the other handrails are replaced in the same way. 1. Using a screwdriver, pry off the two...

Replacing sun visors
Note: The replacement is shown using the left sun visor as an example; the right visor is replaced in the same way. You will need a TORX T20 key. 1. Remove the sun visor bracket mounting screw and remove the sun visor....

Removal and installation of interior trim
The interior trims are removed if they are damaged or to gain access to other body components. Removing the center pillar trim is described in the process of removing the front seat belt (see "Replacing the front seat...

Removal and installation trunk trim
The pile semi-soft upholstery of the trunk consists of three parts: left, right and the trunk floor mat. The left and right parts of the upholstery are fixed to the body with pins and holders. The floor mat, covering...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Interior (internal elements) Renault Megane 1 (1995-2002)
➽ Body and interior: Interior (internal elements) Renault Fluence 1 (2009-2020, petrol)
➽ Body and interior: Interior (internal elements) Renault Duster 1 (2009-2017)
➽ Body and interior: Interior (internal elements) Renault Sandero 1 (2007-2012, petrol)
➽ Body and interior: Interior (internal elements) Renault Espace III (1996-2002)
➽ Body and interior: Interior (internal elements) Renault Symbol 1 (1999-2008, petrol)

Link to this section in different formats

TEXTHTMLBB Code