1. Remove the cushion and rear seat back (see «Removal and installation of a back seat»).
2. Turn out bolts of fastening of locks of back seat belts to the basis of a body and remove locks.
Note. The following shows the removal of the left rear seat belt. The right belt is removed in the same way.
3. Turn out a bolt of the bottom fastening of a belt.
4. Bending the edge of the upholstery of the shelf at the rear window, unscrew the bolt of the inertial coil...
5....and remove the coil from the shelf.
6. Remove the lining from the shelf upholstery hole...
7.... remove the lining from the belt...
8.... pass the bracket for the lower belt fastening into the hole in the upholstery of the shelf and remove the belt from the car.
9. Install the rear seat belt and all removed parts in the reverse order of removal.