Exterior body components Removable body components, sedan (L52): 1. Front shock absorbing beam. 2. Front body panel. 3. Hood. 4. Front fender. 5. Dashboard cross member center plate. 6. Dashboard cross member. 7. Front door. 8. Back door. 9....
Front bumper Note: : replace the part with a new one after each removal. 1. Front emblem. 2. Radiator grille. 3. Plug socket for the towing eye. 4. Front bumper. 5. Fog lamp cover. 6. Mounting the fog lamp. 7. Fog lamp. 8. Front...
Front fenders and hood 1. Front bumper assembly. 2. Head lamp. 3. Hood. 4. Canopy of the hood. 5. Side direction indicator. 6. Front fender liner. 7. Front fender. 8. Side bracket of the front bumper. 9. Fog lamp. Removal and installation of...
Front body panel Removal and installation of the forward panel of a body Removing the front body panel 1. Place the vehicle on a two post lift. 2. Remove the front fenders. 3. Remove the front bumper. 4. Remove the headlights. 5....
Front doors Note: : replace the part with a new one after each removal. : special tool/device must be used 1. Front door canopy. 2. Front door limiter. 3. Internal handle for unlocking the front door. 4. Draft of the internal...
Rear doors Note: : replace the part with a new one after each removal. 1. Back door. 2. Clips of a covering of a back door. 3. Tailgate trim. 4. Internal handle for unlocking the rear door. 5. Bolt of the internal handle of...
Rear bumper Note: : replace the part with a new one after each removal. Sedan version (L52): 1. Rear light. 2. Rear bumper. 3. Rear fender liner. 4. Rear mudguard. 5. ABS sensor cover. 6.Rear bumper support. 7. Facing the rear...
Trunk lid (sedan) Note: : a special tool/tool must be used. 1. Trunk lid. 2. Emblem. 1. The secret of the trunk lid lock. 2. Trunk lid lock. 3. A bolt of fastening of the lock of a cover of a luggage carrier. 4. Nut of fastening of a...
Tailgate (station wagon) Note: : You must use a special tool/fixture. 1. License plate lighting. 2. Facing the tailgate (Car.1363). 3. Tailgate. 4. Tailgate wiper. 5. Emblem. 1. The secret of the tailgate lock. 2. A nut of fastening of a secret...
Trunk release cable Removal and installation of a cable of a drive of unlocking of a luggage carrier Removing the tailgate release cable 1. Remove the lid/tailgate release lever (1). 2. Partially remove the left front door seals. 3. Remove...
Cable for unlocking the hatch of the fuel tank filling neck Removal and installation of a cable of a drive of an unlocking of the hatch of a refueling mouth of a fuel tank Removing the fuel filler door release cable 1. Remove the fuel filler flap release lever (1). 2. Partially...
Exterior mirrors Note: : you need to use a special tool/fixture. Outside rearview mirror, type A: 1. Mirror (Car. 1363). 2. Mirror housing. 3. Facing of the case of an external rear-view mirror. 4. Front door. 5. Bolts of fastening of...
General information on car glass repair Glued windows are an integral part of the structure of the car body. To ensure the necessary rigidity of the body and the required level of passive safety, the manufacturer recommends adhering to the repair procedures...
Body clearance adjustment values Note: Clearance values are for reference only. When adjusting the gaps, you must adhere to the following rules: ensure the symmetrical position of the element on the opposite side of the body; make sure that the body...
Checking the dimensions of the underbody Points C1/C2 G1/G2 points Points B1/B2 Points J1/J2 In the event of a frontal impact, the following dimensions must be compared, which are diagonal lines between points on opposite sides of the vehicle: 1) B1 - G2 = B2...