Note:
Clearance values are for reference only. When adjusting the gaps, you must adhere to the following rules:
- ensure the symmetrical position of the element on the opposite side of the body;
- make sure that the body surfaces match in height;
- make sure that the opening elements of the body open and close freely, check their tightness.
Sedan (L52)
station wagon (K52)
№ | Location | Gap, mm |
1 | Hood/Grille | 19 ± 1 |
2 | Headlights/radiator grille | 2,5 ± 1,5 |
3 | Hood/Headlights | 5,5 ± 1,2 |
4 | Headlights/front fender | 1.6 ± 1 |
5 | Hood/front fender | 3,5 ± 1,5 |
6 | Front fender/front door | 4 ± 1,2 |
7 | front door/roof | 17,5 ± 1,8 |
8 | Rear door/roof | 17,5 ± 1,8 |
9 | front door/rear door | 4 ± 1,2 |
10 | Side doors/sill panel | 5 ± 2 |
11 | Rear door/rear wing panel | 4 ± 1,2 |
Sedan (L52)
№ | Location | Gap, mm |
12 | Trunk Lid/Rear Fender Panel | 3,5 ± 1,6 |
13 | Trunk lid/tail light | 4,7 ± 1 |
14 | trunk lid/rear bumper | 6 ± 2,5 |
15 | Rear light/rear wing panel | 1,3 ± 1 |
16 | Rear fender panel/fuel filler cap | 3,5 ± 1,2 |
17 | Rear fender panel/fuel filler cap | 3,5 ± 1,2 |
station wagon (K52)
№ | Location | Gap, mm |
12 | Roof/tailgate spoiler | 5 ± 1 |
13 | Tail light upper trim, tailgate spoiler | 4 ± 1,6 |
14 | tailgate/tail light | 4 ± 1,6 |
15 | tailgate/rear bumper | 6±2,5 |
16 | Rear light/rear wing panel | 1,3 ± 1 |
17 | Rear fender panel/fuel filler cap | 3,5 ± 1,2 |
18 | Rear fender panel/fuel filler cap | 3,5 ± 1,2 |