Removal and installation the front body panel
Removal the front body panel
1. Place the vehicle on a two-post lift.
2. Remove the front mudguards.
3. Remove the front bumper.
4. Remove the headlights.
5. Unscrew the ground bus nut from the left headlight housing panel.
6. Remove the hood lock.
7. Depending on the equipment level, remove the power steering reservoir, air intake duct and clips.
8. Loosen the bolts (1) securing the front bumper shock absorbing beam.
9. Unscrew bolts (2) and (3) on both sides of the vehicle.
10. Remove the front body panel.
Installing the front body panel
Installation is carried out in the reverse order of removal.