General information — passive safety system The airbag system includes an airbag processor, driver airbag, front passenger airbag, front passenger airbag switch, front and side impact sensors. Airbag processor Driver airbag Front passenger airbag Front Passenger...
Repair Precautions Attention: Work on the airbag and seat belt pretensioner systems should only be carried out by experienced and trained personnel. The airbags are equipped with a pyrotechnic gas generator with an igniter and an...
Front seat belts Removal and installation of forward seat belts Note: The seat belt must be reeled in by the rewinder. Attention: To avoid triggering pyrotechnic devices (airbags and pretensioners) when working near them, it is...
Rear seat belts Removal and installation of rear side seat belts Removing the rear side seat belt 1. Remove the back cushion and backrest (whole or separately - 1/3 and 2/3). 2. Remove the lower bolt of the rear side seat belt. 3....
Components of the airbag system Attention: Do not use near pyrotechnic devices (seat belt pretensioners and airbags) Heat sources and open flames - Pyrotechnic devices may work. To avoid any unforeseen accidents, do not reuse pyrotechnic devices....
Driver's airbag Removal and installation of the driver's airbag Removing the driver's airbag 1. Connect a diagnostic tool and use it to disable the airbag processor. 2. Turn the steering wheel a quarter of a turn. 3. Unhook one of the...
Contact disc Removal and installation of a contact disk Removing the contact disk 1. Set the front wheels of the vehicle to the straight ahead position. 2. Block the airbag processor. 3. Turn off the ignition. 4. Disconnect the...
Front passenger airbag Removal and installation of a pillow of safety of the forward passenger Removing the front passenger airbag 1. Block the airbag processor. 2. Turn off the ignition. 3. Disconnect the negative battery terminal. 4. Remove...
Front Passenger Airbag Switch Removal and installation of the switch of a pillow of safety of the forward passenger Removing the front passenger airbag switch 1. Block the airbag processor. 2. Disconnect the negative battery terminal. 3. Remove the...
Side impact sensor Removal and installation of the side impact sensor Removing the side impact sensor 1. Block the airbag processor. 2. Turn off the ignition. 3. Disconnect the battery. 4.Remove the B-pillar trim. 5. Loosen the side...
Recycling and disposal of airbags and seat belt pretensioners Attention: To avoid damage to the systems, strictly follow the instructions for safety and cleanliness and work. To avoid accidents, reuse pyrotechnic elements. Be sure to disable the seat belt pretensioners or airbags...
Airbags Note: Deactivation of airbags must be carried out outdoors in an open area. Deactivatable airbags must be removed. If the airbag has two chambers (with two connectors) the neutralization operation is performed with each...
Prednata inhabitants and pyrotechnic reels of seat belts Disposal of a part installed on a scrapped vehicle 1. Remove the car from the premises. 2. Mark the adapter corresponding to the pyrotechnic element to be neutralized. 3. Attach: neutralization device (Ele. 1287) to the...
Special tools and fixtures Name of tool and fixtures Catalog number Device for neutralizing airbags and seat belt pretensioners. Ele. 1287 Set of two adapters for the airbag and pretensioner deactivator. Ele. 1287-02 Set of two adapters for the...