Disposal of a part installed on a scrapped vehicle
1. Remove the car from the premises.
2. Mark the adapter corresponding to the pyrotechnic element to be neutralized.
3. Attach:
- neutralization device (Ele. 1287) to the adapter
- adapter to the pyrotechnic element.
4. Unwind the entire wire of the device so that when the pretensioner is activated, be at a sufficient distance from the car (about 10 meters).
5. Connect both power wires of the device for neutralization (Ele. 1287) to the battery.
Attention: To prevent accidents during the disposal of the pyrotechnic element, make sure that no one is in the immediate vicinity of it.
6. Deactivate the airbag by simultaneously pressing both buttons on the deactivation device.
Neutralization of the assembly after removal from the vehicle
Proceed in the same way as when disabling the airbag (by placing the knot among the old tires stacked on top of each other).