Remove:
- front seat;
- front seat cushion cover.
Note the wiring harness routing on the seat frame.
Attention. To prevent problems from occurring (noise, premature wear, short circuit, etc.) after installation, mark the wiring harness route and connector connection.
Unblock (1) connector (2) front seat belt lap pretensioner.
Disconnect connector (2) front seat belt lap pretensioner.
Remove:
- fastening bolt (3) lap belt pretensioner in the front seat;
- front seat belt lap pretensioner bolt.
Note. The seat belt lap pretensioner bolt on the front seat must be replaced.
Install the lap belt pretensioner in the front seat by installing the fastener (4) into the seat cushion frame.
Torque tighten the front seat lap pretensioner bolt to 25 Nm.
Lay the wiring harness in the position marked during removal.
Connect the front seat lap pretensioner connector.
Lock the front seat lap pretensioner connector.
Install the parts in reverse order.