Car rear suspension Renault Fluence 1

Rear axle assembly
Place a hydraulic jack under the rear suspension beam. Unscrew the brake hose fittings (1). Remove the mounting nut (2) of the ball joint of the rear body height sensor rod of the headlight range control (if installed)....

Rear axle support silent blocks
Make a mark (1) on the rear axle and align it with the color mark on the silent block. Remove the silent blocks (2) using a hammer and puller (Tag. 1838) (3). Install the silent blocks so that their color markings match...

Rear wheel hub axle
Disconnect the wheel speed sensor (1) from its holder. Remove: bolts (2) of the rear steering knuckle holder; rear wheel hub axle. Note: The rear wheel hub axle mounting bolts must be replaced. Clean the rear steering...

Rear shock absorber
Rear shock absorber: 1 - spring; 2 - upper spring cup; 3 — front filter housing; 4 - nut; 5 - bolts; 6 — nut cover. Place the car on a lift. Remove: rear wheels; rear suspension fairing holders; rear suspension fairing...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Chassis, running gear: Rear suspension Renault Symbol 2 (2008-2013, petrol)
➽ Chassis, running gear: Rear suspension Renault Espace III (1996-2002)
➽ Chassis, running gear: Rear suspension Renault Sandero 1 (2007-2012, petrol)
➽ Chassis, running gear: Rear suspension Renault Logan 1 (2004-2012, petrol)

Link to this section in different formats

TEXTHTMLBB Code