Rear axle beam assembly — removal and installation Tightening torques: Beam nut - 55 Nm Wheel bolt - 90 Nm Nut of the upper shock absorber support - 20 Nm Shock absorber lower support bolt - 105 Nm Removing 1. Put the car on a lift. 2. Remove rear wheels. 3. Press a...
Replacing the rear shock absorber — removal and installation Tightening torques: Nut of the upper shock absorber support - 20 Nm Shock absorber lower support bolt - 105 Nm Rear Suspension Shock Details: 1 - shock absorber rod; 2 - shock absorber working cylinder; 3 - eye of the...
Replacing the rear suspension spring If one spring is damaged (cracks, breakage of coils, loss of elasticity) Both springs must be replaced. Attention! Due to the design of the suspension, remove the springs only one at a time. Tightening torques: Shock...
Replacing the rear hub bearing Special tool: Inertial puller - Emb. 880 Hub cap extractor - Rou. 943 Tightening torques: Wheel block - 90 Nm Hub nut - 175 Nm The rear wheel hub bearings are similar in design to the front wheel hub bearings; they do...
Replacing the silent blocks of the rear levers Special tool: Mandrel set - T.Ag. 1454 Clamp - T.Av. 1420 Hydraulic screw - T.Av. 1420-01 Tightening torques: Nuts for fastening the beam to the body - 60 Nm Suspension bushing bolts - 70 Nm Replacement order: turn on...