Front wheel drive — design description Front wheel drives: And - a drive of the left forward wheel; B - right front wheel drive; 1 - slotted tip; 2.18 - external hinges; 3,5,7, 11,13,16 - clamps; 4,7,12,17 - covers; 6.14 - front wheel drive shafts; 8 - case...
Drive shaft — removal and installation Lubrication of the drive shaft joints is supplied in a repair kit. GE86 hinge uses MOBIL OIL 55911L611 (180 grams), for hinge RC462 - grease SHELL STAMINA 0233 (110 cm 3 ). Special tool: Punch - BW 31-01 Drive shaft nut...
Replacing the bellows of the internal hinge type GL69 (at the checkpoint) Attention! A T.Av. mandrel is required to complete the job. 1331 to install boot bearing. Figure 4.52. CV joint type GL 69 («tripod»): 1 – dirt protection ring; 2 - support ring; 3 - holder; 4 - corrugated cover; 5 -...
Replacing the bellows of the inner hinge type RC462 (At the checkpoint) 1 - Sleeve, 2 - Cross, 3 - Retaining ring, 4 - Cover, 5 - Clamp. Operating procedure: remove the drive shaft; bite both clamps with a suitable tool and slide the cover from the hinge towards the shaft; Remove as much...
Replacement of the bellows of the external hinge type GE86 (at the hub) Figure 4.51. CV joint RC 462 («tripod»): 1 - retaining ring; 2 - hinge body; 3 - three-spike; 4 - clamps; 5 - corrugated cover Refer to Figure 4.51 for operation. Operating procedure: remove the drive shaft; bite both...
Drive shaft joints — check While driving at low speed with the steering wheel turned all the way to one side, listen for the sounds made by the hinge. Clicking and crackling in the front suspension area indicate a malfunction (wear and tear)...