Vehicle drive shafts Renault Megane 1

Specifications and description of drive shafts
Characteristic Meaning Type/Specification Special grease supplied with new CV joint boot kits Quantity (for one CV joint) - models with manual transmission: cV joint GE 86 cV joint AC 1700 cV joint GI 62 cV joint RC...

Removal and installation the drive shaft
Note: It is necessary to replace the "Nylstop" type nut with an "Enko" nut (installed without the use of a gripping compound). If the vehicle is already equipped with an "Enko" type nut, there is no need to replace it -...

Replacing the protective cover of the outer CV joint of the drive shaft (models with manual transmission)
1. Remove the drive shaft (refer to Section Removal and installation the drive shaft ). 2. Cut the fastening clamps of the protective cover and slide the cover towards the outer CV joint. 3. Remove as much grease from...

Replacing the protective boot of the inner CV joint of the right drive shaft (models with manual transmission)
1. Remove the drive shaft as described in Section Removal and installation the drive shaft . 2. These models use two types of CV joints: Gl62 and RC490. The joints can be distinguished by the shape of their housing. The...

Replacing the protective cover of the inner CV joint of the left drive shaft (models with manual transmission)
1. Remove the drive shaft (refer to Section Removal and installation the drive shaft ). 2. Using special pliers, remove the retaining ring securing the tripod to the drive shaft. Please note that on some models the CV...

General description of replacement of the protective cover of the drive shaft (automatic transmission)
At the time of writing this Manual, no information was provided by the manufacturers regarding the removal of the drive shaft on these models. If replacement of the protective boot is required, contact a Renault service...

General description of drive shaft overhaul
If any of the tests described in Chapter Maintenance , wear of the drive shaft CV joint is detected, remove the wheel cap and make sure that the drive shaft mounting nut is tightened to the correct tightening torque....

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Transmission: Drive shafts Renault Kangoo 1 (1997-2007)
➽ Transmission: Drive shafts Renault Duster 1 (2009-2017)
➽ Transmission: Drive shafts Renault Logan 2 (2012-2020)
➽ Transmission: Drive shafts Renault Laguna 2 (2001-2007)
➽ Transmission: Drive shafts Renault Espace III (1996-2002)
➽ Transmission: Drive shafts Renault Symbol 1 (1999-2008, petrol)

Link to this section in different formats

TEXTHTMLBB Code

Megan 2 (2002-2009, petrol)