Drive shafts — general information Torque from the gearbox to the wheels is transmitted using drive shafts of different lengths, including a constant velocity joint The right drive shaft on vehicles with RK and AD8 gearboxes has an intermediate support...
Drive shafts — technical data Applicability of constant velocity joints Hinge type: Outer joint of the left drive shaft with gearboxes JC5-PK1-AD8 - AC 2900 Left drive shaft inner joint with gearboxes PK1-AD8 - RC 490 Left drive shaft inner joint...
Features of installing the outer part of the right drive shaft Place the required amount of lubricant in the corrugated cover and distribute it evenly over the cover. Note. The amount of lubricant added must strictly correspond to that specified in the chapter « Technical data »....
Replacing the intermediate shaft support bearing Remove the right drive shaft assembly. Using a puller, remove the bearing from the intermediate shaft, while taking care not to scratch the oil seal seat on the intermediate shaft. Installation Lubricate the area of the...
Replacing the CV joint protective boot on the inside of the drive shaft Inner joint of right drive shaft RC 491 - RK gearbox Removal Remove the drive shaft. on which the protective cover needs to be replaced Cut the clamp securing the elastic corrugated protective cover to the drive shaft....