Suspension and steering specifications Steering Construction type - Power rack and pinion steering Front suspension Wheel alignment data Longitudinal inclination of the kingpin early models (J11...) — 3° 25 ± 20' Later models (J63...) — 4 ±20' Camber early...
Steering gear — removal and installation 1. The workshop has a steering mounting template for second generation cars to install the steering gear in an intermediate position. It is an iron angle with a side length of 82.5 mm and is mounted on a rack on the...
Steering wheel and steering column shaft — removal and installation Note: The steering column shaft is removed very rarely, mainly to replace the bushings inside the shaft with high mileage. Removing the steering column shaft 1. Disconnect the battery and remove the horn button from the...
Filling and bleeding the steering system 1. Fill the reservoir with the prescribed liquid. The system can be filled with automatic transmission fluid from Elf (Renaultmatic D2), Mobol (ATF 220) or Total (Dexron). Depending on the year of manufacture, the tanks...
Power steering pump 1. Due to the fact that different power steering pumps are installed on Espace vehicles, the process for removing and installing them is different. Removal and installation of the pump 2. Disconnect the battery. 3....
Front wheel alignment 1. Optical instruments are used to check the alignment of the front wheels. If necessary, check the camber or kingpin caster with a measuring device. The geometry of the front wheels is measured in the following...