3.1 Replenishment tanks for power steering hydraulic fluid. Left on earlier first generation models, right on later first and second generation models
2. Early models (left figure) the liquid must be above the grate, on later models (right drawing) liquid should reach the place marked with an arrow.
3. After the liquid is filled, do the following:
4. Place the front of the car on a lift.
5. Ask an assistant to turn the steering wheel from one extreme position to another, while you fill in the liquid in the nutrient tank, the liquid level should fall.
6. Lower the car on wheels, start the engine and again turn a steering wheel from one extreme position to another. Repeat these steps until the fluid level stops dropping.