Car clutch repair Renault Espace 3

Clutch — technical characteristics
Clutch Brand and type: petrol engine F3R Valeo 2215DBRN4400 diesel engine G8T B02300308 Clutch release fork travel on cars with petrol engines, mm — 26-28 Clutch slave disc F3R Engine diameter, mm — 215 thickness, mm —...

Clutch — General Description
Fig. 5.1. Clutch: A - cars with gasoline engines; B - cars with diesel engines: 1 - driven clutch disc; 2 - clutch housing with pressure plate; 3 - clutch release bearing; 4 - clutch release fork; 5 - hemispherical...

Replacing the clutch slave disc or clutch housing with pressure plate
Removal Remove the gearbox. Using the Mot.852 tool or a large screwdriver, lock the flywheel from turning by the teeth of the ring gear (fig. 5.2, 5.3). Fig. 5.2. Using the Mot.852 device to prevent the flywheel of a...

Bearing and clutch release fork
Removal Remove the gearbox. Tilt the fork and remove the clutch release bearing. Remove the rubber protective boot and push the fork into the clutch housing. Installation Apply MOLYKOTE BR2 to the walls of the guide...

Clutch cable
Removal Disconnect the wires from the battery terminals. Remove the air filter. Disconnect the cable from the clutch release fork. Disconnect the clutch cable from the bracket on the engine. To remove the clutch cable...

Replacing the dual mass flywheel
Removal Remove the gearbox. Remove the clutch housing with the pressure plate and the driven clutch disc. Using the Mot.852 tool, block the flywheel from turning ( fig. 5.3 ) Loosen the flywheel mounting bolts (bolts...

Replacing the hydraulic clutch release drive
The hydraulic clutch drive consists of two sections. If one section fails, the other section must be replaced. The drive is supplied filled with liquid with the main and working cylinders bled and during installation...

New design clutch slave cylinder
Clutch parts of the old and new designs are not interchangeable. Removal Disconnect the cable from the negative battery terminal. Remove the retainer (2, Fig. 5.12) installed on the fitting and disconnect the pipe...

New design clutch master cylinder
Fig. 5.15. Clutch slave cylinder Clutch parts of the old and new designs are not interchangeable. Removal Disconnect the cable from the negative battery terminal. Place the car on a lift. In the engine compartment Drain...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Transmission: Clutch Renault Kangoo 1 (1997-2007)
➽ Transmission: Clutch Renault Megane 1 (1995-2002)
➽ Transmission: Clutch Renault Clio 1 (1990-1998)
➽ Transmission: Clutch Renault Duster 1 (2009-2017)
➽ Transmission: Clutch Renault Sandero 1 (2007-2012, petrol)
➽ Transmission: Clutch Renault Laguna 2 (2001-2007)

Link to this section in different formats

TEXTHTMLBB Code