Removal
- Disconnect the wires from the battery terminals.
- Remove the air filter.
- Disconnect the cable from the clutch release fork.
- Disconnect the clutch cable from the bracket on the engine.
- To remove the clutch cable sheath clamp from the front panel, remove the console under the steering wheel.
- Pull the clutch cable into the engine compartment.
Installation
- From the engine compartment, pass the clutch cable into the vehicle interior.
- Attach the cable to the clutch pedal and engine bracket.
- Attach the cable to the clutch release fork.
- Press the clutch pedal to engage the cable sheath clamp in place in the bulkhead.
- The cable length is adjusted automatically.
- Make sure the clutch drive is working properly.
- With the pedal released, pull the cable at the clutch release fork (rice. 5.8). The cable should move a distance of 3 mm.
- Install the air filter and connect the wires to the battery terminals.