Description of the design of the heating and ventilation system Heating and ventilation device (right side view) 1 - air inlet; 2 - additional resistance of the electric fan motor; 3 - radiator tank; 4 - salon; 5 - heat exchanger; 6 - valve regulator lever for warm and cold air; 7 -...
Checking the heating and ventilation system With the left half of the housing of the heating and ventilation device removed, the following elements can be seen 1 - centrifugal fan; 2 - mixing valve for warm and cold air; 3 - control cables; 4 - air mixer valves;...
Fan — check, removal and installation Electric fan motor (1) supplied with current for operation at different speeds from the wire (4) through a contact (5) and extra resistance. It is very important that after loosening the fastening screws (3) when...
Air conditioner — general information Renault 19 can be equipped with air conditioning. It works like this: like in a refrigerator, the gaseous refrigerant is compressed by a compressor. The compressor is driven by the engine crankshaft via a ribbed V-belt....
Troubleshooting the heating system Heating Malfunction Cause Debugg A. Weak heating power. The air valve does not close completely. Check the position of the Bowden cables; make the valve movable, if necessary, remove foreign bodies. B. Heating does not...