However, if automatic bleeding of the fuel system is not performed, then it is recommended to do the following, observing the rules and requirements for cleanliness when working with the fuel system:
- A) bleed the fuel filter with the manual priming lever, see the relevant chapter;
- b) loosen the fuel lines on all injectors one by one and engage the starter. As soon as fuel begins to flow out at the loose joint, tighten the fuel line again with a force of 25 Nm;
- V) collect leaked fuel with rags.
Attention! Make sure that diesel fuel does not get on the cooling system hoses. In case of fuel spillage, immediately remove and thoroughly wipe the hose.