Technical characteristics of engines for diagnostic procedures of the fuel injection system (K4M engine) (Renault Fluence 1)

¹ at a coolant temperature above 80°C and a steady engine speed of 2500 rpm for approximately 30 seconds.
² the use of unleaded petrol with an octane rating of 91 is permitted.
³ standardized indicators are determined by the legislation of each specific country.
⁴ at 2000 rpm the CO₂ content should not exceed 0.3%.

4 at 2000 rpm the CO₂ content should not exceed 0.3%.

(The original can be found on the website www.RENAULTBOOK.ru)

4 at 2000 rpm the CO₂ content should not exceed 0.3%.

This article is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Article has been reviewed by editor: Podkrepilov Maxim

Share with friends:

Fluence 1: Fuel injection

Camshaft phase regulator
Throttle body
Operation of signal lamps
Features of the multi-point injection system

Engine Specifications for Fuel Injection System Diagnostic Procedures…
Error codes of the diagnostic tool «CLIP» (engine K4M)
Intake manifold and throttle body (K4M engine)
Intake Manifold and Throttle Body (M4R Engine)
Cleaning the throttle body