Car fuses and relays Renault Fluence 1

Relays — General Information
A relay is an electronically controlled switch that is typically used as follows: switches large currents remotely from the circuit in which the current flows, allowing the use of thinner wires and switch contacts; has...

Passenger compartment fuse and relay box (260)
Note: In this section, the numeric codes in brackets, such as (260), are used in electrical diagrams. The unit is located in the passenger compartment, in the lower left part of the dashboard. Purpose of the relay...

UCHBS (645) — connectors
The unit is located in the passenger compartment, in the lower left part of the dashboard. A (24-pin connector) black color BS (40-pin connector) gray color WITH (40-pin connector) green color D (12-pin connector) black...

Protection and switching unit (1337) — connectors
CL (2-pin connector) black color CM (6-pin connector) black color CN (12-pin connector) brown color ST1 (12-pin connector) gray color ST2 (12-pin connector) gray color

Protection and switching unit (1337) — fuses
The unit is located in the engine's switching unit (in the engine compartment). Note: Fuses 24, 25 and 26 on the protection and switching unit cannot be removed. AN (8-pin connector) brown color MT1 (12-pin connector)...

Power Supply Circuit Fuse Block (777)
The unit is located behind the battery. Purpose of fuses (depending on the equipment level)

Engine Compartment Fuse and Relay Box (597)
The unit is located in the switching unit in the engine compartment under the protection and switching unit (1337). Purpose of fuses (depending on the equipment level) Purpose of the relay (depending on the equipment...

Battery disconnect unit (1144) — on H4J, K4M engines
The unit is located behind the battery. Note: Only fuse F7 from the battery disconnect module is accessible for removal. Purpose of fuses (depending on the equipment level) Black connector pin assignments (3-pin),...

Battery Disconnect Block (1144) — on M4R engine
The unit is located behind the battery. Note: Only fuse F7 from the battery disconnect module is accessible for removal. Purpose of fuses (depending on the equipment level) Black connector pin assignments (3-pin),...

Engine Cooling Fan Relay Panel (234)
The unit is located next to the electric fan. Single relay

Removal the protection and switching unit
Turn off the ignition. Disconnect the battery. Press the safety latches (1) of the protection and switching unit cover. Remove the cover of the protection and switching unit. Remove the bracket (2) of the wiring harness...

Removal the battery disconnect unit
Disconnect the battery. Mark the wiring harness routing and connections to the battery disconnect block. Loosen the power wire fastening nut (2) on the battery disconnect unit. Disconnect the power wires from the...

Removal the UCH
Turn off the ignition. Disconnect the battery. Remove the lower instrument panel trim (1). Car ECU: 1 - protection and switching unit; 2 — UCHBS; 3 - fuse and relay box in the passenger compartment; 4 — Airbag control...

Replacing the additional fuse and relay box
Disconnect the battery. Loosen the nut on the battery disconnect block. Disconnect the power wires from the battery disconnect unit. Loosen the battery disconnect block nut. Remove the nut securing the power wire from...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Link to this section in different formats

TEXTHTMLBB Code