Loosen the nut on the battery disconnect block.
Disconnect the power wires from the battery disconnect unit.
Loosen the battery disconnect block nut.
Remove the nut securing the power wire from the fuse and relay box in the engine compartment.
Remove the power wiring from the fuse and relay box in the engine compartment.
Remove the block by moving it upwards (4).
Mark the wiring harness route in the cover.
Disconnect the fuse box wiring harness holders (5).
Remove the fuse box cover by pressing the latches (6).
Remove:
- nuts for fastening the corresponding fuses;
- appropriate fuses.
Install appropriate fuses.
Tighten the fuse mounting nuts to the specified torque of 5 Nm.
Be sure to replace the fuse box cover when installing the wiring in the position noted during removal.
 |
 |
Lower the fuse box by installing it on the studs (8) and into the battery shelf insert (7).
Install the power wiring to the fuse and relay box in the engine compartment.
Tighten the nut securing the power supply wire of the fuse and relay box on the shelf under the battery to the required torque of 8 Nm. Install the power supply wires of the battery disconnect unit.
(The original can be found on the website renaultbook.ru)
Tighten the power cable fastening nut on the battery disconnect block to the specified torque of 8 Nm.