Contents: High/low beam headlights 🠛 Front side lights and direction…🠛 Cleaning headlights 🠛 Replacing fog light bulbs 🠛 Headlight adjustment 🠛 Rear lights 🠛 Third brake light 🠛 License plate light 🠛 Direction indicators 🠛 Interior lighting of the salon 🠛 Directional lighting flashlight 🠛 Luggage compartment lighting 🠛
High/low beam headlights
Remove the plastic cover 1 by turning it a quarter of a turn.
Disconnect spring clip 2 and remove the lamp.
Disconnect the lamp connector.
Install cover 1.
Halogen (iodine) lamp type: H4.
Caution! Do not touch the glass bulb of the halogen lamp with your hands.
Material taken from an online portal (RenaultBook.ru)
Front side lights and direction indicator
To replace the front parking light bulb:
- remove the plastic cover 1 by turning it a quarter of a turn;
- remove socket 3 to get the lamp.
Lamp type: 5 W.
To replace the turn signal bulb:
- disconnect lamp connector 4;
- to remove the bulb, turn the socket a quarter turn.
Lamp type: pear-shaped lamp with bayonet base P 21 W.
Cleaning headlights
To clean headlights equipped with plastic "glass", use a soft cloth or cotton wool.
If the stains do not come off dry, lightly dampen the cloth with soapy water. Finally, wipe with a soft, dry cloth.
Attention! The use of detergents containing alcohol is prohibited.
Replacing fog light bulbs
To replace:
- unscrew the mounting bolt 1;
- pull the headlight forward;
- disconnect the wires.
Remove cover 2 by turning it. Disconnect the lamp connector. Disconnect the spring clip 3.
Remove the lamp.
Hold the new bulb by the socket or through the paper and install it in place.
Lamp type: halogen (iodine): H1.
Headlight adjustment
It is carried out at the RENAULT service station.
Rear lights
Loosen nuts 1 and remove the rear light from its socket.
Disconnect the cartridge by pressing the lock 2.
3 - Side light and brake light
Pear-shaped lamp with bayonet base and two filaments P 21/5 W.
4 - Direction indicator
Pear-shaped lamp with bayonet base P 21 W.
5 - Reversing light (right)
Fog light (left)
Pear-shaped lamp with bayonet base and two filaments P 21 W.
Third brake light
Loosen nuts 1 and remove the rear light from its socket.
2 - Lamp type P21/5W
License plate light
Using a flat-head screwdriver type tool, disconnect the light 1.
Remove the lamp to gain access to the bulbs 2.
Lamp type W5W.
Direction indicators
Remove the lamp cover 1 using a tool.
Remove lamp 2
Lamp type W5W.
Interior lighting of the salon
Remove the lamp cover 1 using a flat-head screwdriver type tool.
Remove lamp 2.
Lamp type: cylindrical with end cap, 7 W.
Directional lighting flashlight
Disconnect the cartridge by pressing the lock 2.
Cartridge 4, released from the retainer, falls out under its own weight.
Remove reflector 6 from cartridge 4.
Replace lamp 5 and reassemble, being careful not to damage the lamp's contact tabs.
Lamp type: cylindrical with end cap, 7 W.
Luggage compartment lighting
To remove the cartridge, press the latches 1.
Press the lock 2 to detach the diffuser and remove the lamps 3.
Lamp type: cylindrical with end cap, 7 W.