Inner tie rod joint Required special tool T. Av. 476 Ball joint puller. Dir. 1305-01 Device for replacing the inner joint of the steering rod. Dir. 1306 Rail locking tool. Tightening torques, Nm Wheel bolts 90. Nut of fastening of the...
Steering gear without power Required special tool T. Av. 476 Ball joint puller. Tightening torques, Nm Wheel bolts 90. Nut of fastening of the steering hinge 37. Steering gear mounting bolts 55. Bolt of fastening of a fork of the cardan hinge of a...
Power steering gear Required special tool T. Av. 476 Ball joint puller. Mot. 453-01 Hose clamp. Tightening torques, Nm Wheel bolts 90. Nut of fastening of the steering hinge 37. Steering gear mounting bolts 50. Bolt of fastening of a fork...
Case — general information Attention! Each time the inner tie rod joint is replaced, the boot must be replaced. 1. Cover the inner tie rod joint with a fairing cap to prevent damage to the boot during installation. 2. Lubricate the bearing...
Reiki — general information Adjustment Attention! If the rack gear knocks, check that the rack gear is properly adjusted before replacing the steering gear. 1. Determining the source of the knock. Fix the rack on the gear side and check the...
Power steering pump Required special tool Mot. 453- 01 Hose clamp. T. Ag. 1094 Puller. D7F engine without air conditioning Removing 1. Place the vehicle on a two post lift. 2. Remove the power steering pump drive belt. 3. Remove the...
Power steering pump pulley D7F, F8Q engines without air conditioning Removing 1. Remove the power steering pump drive belt. 2. Remove pulley (three mounting bolts). Installation 1. Installation is made in an order, the return to removal. 2....
Steering column Tightening torques, Nm Steering wheel bolt 45. Bolt of fastening of a fork of the cardan hinge of a steering shaft 25. Steering column nuts 20. Removing 1. Disconnect the wires from the battery. 2. Set the steer wheels...