Steering device 1 - Tie rod 2 - Rod with internal ball joint 3 - Steering column 4 - Protective cover of the steering mechanism 5 - Steering column adjustment lever
Tie rod — removal and installation Torque Nut of fastening of a spherical support of the lever of a forward suspension bracket 37 Nm Wheel alignment locknut 53 Nm Removing Place the car on a two post lift. Remove the front wheel. Loosen locknut (1) wheel...
Rod with internal ball joint Tightening torque: Tie rod inner ball joint - 80 Nm. Removing Place the car on a two post lift. Remove the front wheel from the corresponding side. Remove the tie rod. Remove the protective cover from the steering gear....
Steering column — removal and installation Torque Bolt of terminal connection of a plug of the cardan hinge of a steering shaft 21 Nm Steering column nuts 21 Nm Removing Set the wheels to straight ahead. Lock the airbag computer. Disconnect the battery. Remove:...
Steering gear cover Removing Place the car on a two post lift. Remove: front wheel, steering rod, wheel alignment locknut. Cut the yoke (1) securing the protective cover. Remove protective cover (2). Installation Be sure to replace:...
Front guard seal Removing Place the car on a two post lift. Remove: front wheels, protective screen. Remove the steering gear. Using a flat-blade screwdriver, disconnect the seal from the bulkhead in the area (1). Remove the front guard...
Steering column adjustment knob Removing Disconnect the battery. Remove: screws on the lower steering column cover, stalk covers on the steering wheel, ring of system of electronic blocking of start of the engine. Disconnect the connectors. Remove:...
Steering wheel — removal and installation Tightening torque: New steering wheel bolt - 44 Nm. Removing Follow the security shutdown procedure. Attention! Improper installation of the wheels in relation to the steering wheel can lead to the destruction of the...
Power steering pump pressure — check Models with heater Models with K9K engine Loosen the fastening of the high pressure pipe at the outlet of the power steering pump. Connect fitting (2) to the power steering pump port and the power steering pump high...
Power steering pump (K9K engine with heater) Removing Place the car on a two post lift. Remove: left front wheel engine undertray protection, right front fender, accessory drive belt. Install the clamps from the inlet and outlet pipes of the power steering pump....
Power steering pump (K4M engine with air conditioning) Tightening torques Bolts of fastening of the pump of the hydraulic booster of a steering to multipurpose at an arm 21 Nm The union of fastening of the pipeline of a high pressure to the pump of the amplifier of a...
Power steering pump (K4M engine with heater) Tightening torques Bolts of fastening of the pump of the hydraulic booster of a steering to multipurpose at an arm 21 Nm High pressure pipe fitting on power steering pump 21 Nm Bolt of fastening of a flange of the...
Power Steering Pump Pulley Removing Remove the power steering pump. Use a press with a gripper puller. Installation Press the pulley with the tool (1) before obtaining the pressing size (generously lubricate the threads and bearing surface of the...
Power steering pump assy (K9K engine with air conditioning) Tightening torques Electric pump assembly bolts 21 Nm Power steering electric pump assembly nut 21 Nm Bolt of fastening of a flange of fuel lines of a high pressure to knot of the electric pump 21 Nm Removing Place the...
Power steering pipelines (K4M engine) Tightening torques The union of fastening of the pipeline of low pressure to the steering mechanism 21 Nm Bolt of fastening of the pipeline of low pressure on a stretcher 21 Nm High pressure pipe fitting on power...
Power steering pipelines (K9K engine) Tightening torques High pressure pipe union on the steering gear 21 Nm Bolts of fastening of the pipeline of a high pressure on a transmission 21 Nm High pressure pipe fitting on power steering pump assembly 21 Nm Bolt...