Share with friends:
Car windscreen wipers and washers Renault Duster 1
Windshield wiper blade
Removal Raise the wiper arm. Position the blade perpendicular to the wiper arm. Squeeze the latches (1) and at the same time slide them down (2). Remove the brush. Installation Snap the blade onto the wiper arm. Lower...
Removal Raise the wiper arm. Position the blade perpendicular to the wiper arm. Squeeze the latches (1) and at the same time slide them down (2). Remove the brush. Installation Snap the blade onto the wiper arm. Lower...
Windscreen wiper arms
Tightening torques: Windscreen wiper arm mounting nuts - 16 Nm. Removal Turn on the ignition. Attention! To ensure the correct trajectory of the windshield wiper arms, it is necessary to initialize the windshield wiper...
Tightening torques: Windscreen wiper arm mounting nuts - 16 Nm. Removal Turn on the ignition. Attention! To ensure the correct trajectory of the windshield wiper arms, it is necessary to initialize the windshield wiper...
Windshield wiper motor
Tightening torques Windshield wiper motor mounting bolts 8 Nm Windshield wiper motor mounting bolts 16 Nm Removal Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position...
Tightening torques Windshield wiper motor mounting bolts 8 Nm Windshield wiper motor mounting bolts 16 Nm Removal Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position...
Windscreen wiper mechanism
Tightening torques Windshield wiper mechanism mounting bolts 8 Nm Front wiper mechanism fasteners 8 Nm Removal Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position (0)....
Tightening torques Windshield wiper mechanism mounting bolts 8 Nm Front wiper mechanism fasteners 8 Nm Removal Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position (0)....
Rear window wiper lever
Removal Turn on the ignition. Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position (0). Turn off the ignition. Mark the position of the wiper arm. Remove the protective...
Removal Turn on the ignition. Turn the windshield wiper switch from position (0) to position (1), then from position (1) to position (0). Turn off the ignition. Mark the position of the wiper arm. Remove the protective...
Electric motor of the rear window wiper
Removal Turn on the ignition. Move the windshield wiper switch from position (0) to position (1), then from position (1) to position (0). Turn off the ignition. Remove: rear window wiper lever, rear door trim....
Removal Turn on the ignition. Move the windshield wiper switch from position (0) to position (1), then from position (1) to position (0). Turn off the ignition. Remove: rear window wiper lever, rear door trim....
Windscreen washer pump — removal and installation
Removal Remove the windshield washer reservoir. Disconnect the windshield washer pump (1) from the reservoir. Disconnect the tubes from the windshield washer pump. Installation Connect the tubes to the windshield washer...
Removal Remove the windshield washer reservoir. Disconnect the windshield washer pump (1) from the reservoir. Disconnect the tubes from the windshield washer pump. Installation Connect the tubes to the windshield washer...
Windshield washer jet
Removal Disconnect the fluid supply tube from the jet. Disconnect the windshield washer nozzle (1) by pressing the spring clips with a flat-blade screwdriver. Installation Snap the windshield washer nozzle into place....
Removal Disconnect the fluid supply tube from the jet. Disconnect the windshield washer nozzle (1) by pressing the spring clips with a flat-blade screwdriver. Installation Snap the windshield washer nozzle into place....
Rear window washer jet
Removal Disconnect the rear window washer nozzle (2) using the tool (Car. 1363). Disconnect the fluid supply pipe from the rear window washer nozzle. Installation Connect the fluid supply tube to the rear window washer...
Removal Disconnect the rear window washer nozzle (2) using the tool (Car. 1363). Disconnect the fluid supply pipe from the rear window washer nozzle. Installation Connect the fluid supply tube to the rear window washer...
Windshield washer reservoir
Removal Disconnect the tube at places (1). Remove the engine compartment seal (2). Remove: side mounting bolt (3) of the air intake niche semi-grille, the right half of the air intake niche grille (4). Disconnect the...
Removal Disconnect the tube at places (1). Remove the engine compartment seal (2). Remove: side mounting bolt (3) of the air intake niche semi-grille, the right half of the air intake niche grille (4). Disconnect the...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Link to this section in different formats
TEXTHTMLBB Code
- User manual
- Governing bodies
- Car driving
- Devices for comfort
- Car care
- Practical Tips
- Power unit
- Petrol engine (K4M)
- Diesel engine (K9K)
- Power system (K4M)
- Power system (K9K)
- Fuel system
- Petrol injection system (K4M)
- Diesel injection system (K9K)
- Starting and ignition system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Drive shafts
- Chassis, running gear
- Front bearing elements
- Rear load-bearing elements
- Steering
- Control devices
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Interior trim
- Interior heating
- Air conditioning
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Governing bodies
- Wipers/washers
- Audio system
- Electrical circuits