List and arrangement of elements 1 - Air pressure sensor 2 - Idle speed control stepper motor 3 - Air temperature sensor 4 - Throttle position sensor 5 - Ignition coil 6 - Throttle body 7 - Upstream oxygen sensor 8 - Downstream oxygen sensor 9 -...
Oxygen sensors Tightening torques Upstream oxygen sensor 45 Nm Downstream oxygen sensor 45 Nm Removal Upstream oxygen sensor Remove: intake noise muffler, air filter housing. Downstream oxygen sensor Place the vehicle on a two-post...
Throttle Position Sensor Tightening torques Throttle Position Sensor Mounting Bolts 2.4 Nm Air filter housing mounting bolts 9 Nm Removal Remove the intake silencer. Disconnect: the wiring harness (1) from the idle speed control stepper motor,...
ECU of the petrol engine injection system Tightening torques: Fuel injection system ECU mounting nuts - 8 Nm. Removal Disconnect the battery. Remove the bolt (4) from the wire harness groove (5). Move the gutter to the side. Disconnect both connectors (9) of...
Crankshaft position sensor Tightening torques: Crankshaft position sensor mounting bolts - 8 Nm. Removal Remove the intake silencer. Disconnect the connector (1) of the engine crankshaft position sensor. Remove the two bolts (2) securing the...
Fuel distribution ramp / injectors Tightening torques Fuel rail mounting bolts 9 Nm Fuel rail protection mounting nuts 21 Nm Removal Disconnect the battery. Remove: two nuts (1) securing the fuel rail guard, fuel rail protection (2). Disconnect the...