Rear brake pad Brake pads must be replaced as a set on wheels of the same axle; under no circumstances should pads from different manufacturers or different types be installed. Removal Place the vehicle on a two-post lift. Release the...
Rear brake service cylinder Tightening torque Brake cylinder mounting bolt 14 Nm Brake line nipple on rear brake cylinder 14 Nm Removal Place the vehicle on a two-post lift. Install the pedal hold down device on the brake pedal to reduce the...
Rear brake drum Tightening torques: Rear brake drum mounting nut - 280 Nm. When replacing a brake drum, be sure to replace the brake drum on the opposite side. When replacing the brake drum, be sure to replace the brake shoes. Removal...
Rigid brake line Tightening torque Brake cylinder rigid pipe fittings 14 Nm Hard brake line nipples on rear brake hoses 14 Nm Brake lines consist of rigid and flexible parts. Removal Place the vehicle on a two-post lift. Install the...
Shock absorber — removal and installation (4x2 drive) Tightening torque Lower shock absorber mounting bolt 162 Nm Upper shock absorber mounting nut 14 Nm When removing, mark the colors of the spring markings so as not to mix them up when installing. Removal Place the...
Rear suspension spring (4x2 drive) Tightening torque: Lower shock absorber mounting bolt - 162 Nm. When removing, mark the colors of the spring markings so as not to mix them up when installing. Removal Place the vehicle on a two-post lift. Remove the...
Rear suspension beam silent block Removal Place the vehicle on a two-post lift. Remove: rear wheels, rear wheel brake drums, rear suspension assembly. Before removing the rear silent block, mark the position of the silent block in the hole in the rear...
Rear axle assembly (4x2 drive) Tightening torque Bolts for fastening supports 105 Nm Fastening rigid pipelines to wheel cylinders 14 Nm Fastening rigid pipes to brake hoses 14 Nm Removal Release the parking brake. Place the vehicle on a two-post...