Share with friends:
Interior (internal elements) of the car Renault Duster 1
Front side door window lift handle
Removal Window lift handle secured with clamps Pull the ring (3) towards the inside of the vehicle. Detach the holder (4). Remove the front door window handle. Installation A window lift handle secured with clamps...
Removal Window lift handle secured with clamps Pull the ring (3) towards the inside of the vehicle. Detach the holder (4). Remove the front door window handle. Installation A window lift handle secured with clamps...
Rear side door window lift handle
Removal Window lift handle secured with clamps Pull the ring (2) towards the inside of the vehicle. Detach the holder (3). Remove the rear door window handle. Installation Window lift handle secured with clamps Install:...
Removal Window lift handle secured with clamps Pull the ring (2) towards the inside of the vehicle. Detach the holder (3). Remove the rear door window handle. Installation Window lift handle secured with clamps Install:...
Front door limiter
Removal Remove the front door trim. Loosen the front door limiter mounting bolt (1). Remove the seal (2) of the front door limiter. Loosen the front door limiter mounting bolts (3). Remove the front door limiter through...
Removal Remove the front door trim. Loosen the front door limiter mounting bolt (1). Remove the seal (2) of the front door limiter. Loosen the front door limiter mounting bolts (3). Remove the front door limiter through...
Front door lock retainer
Tightening torques: Front door lock retainer - 21 Nm. Removal Remove the front door lock retainer (1). Installation Install the front door lock retainer. Adjust the front door lock latch. Check if the door closes...
Tightening torques: Front door lock retainer - 21 Nm. Removal Remove the front door lock retainer (1). Installation Install the front door lock retainer. Adjust the front door lock latch. Check if the door closes...
Front door lock
Removal Remove: front door trim. support of the guide groove of the front side door. Unscrew the bolts (1) from the protective insert without removing it. Disconnect the door opening drive rod (3) from the retainer (4)...
Removal Remove: front door trim. support of the guide groove of the front side door. Unscrew the bolts (1) from the protective insert without removing it. Disconnect the door opening drive rod (3) from the retainer (4)...
Front door lock cylinder
Removal Remove the front door trim. Remove: fork (1), front door lock cylinder. Installation Installation is carried out in the reverse order of removal. Check the operation of the front door lock cylinder.
Removal Remove the front door trim. Remove: fork (1), front door lock cylinder. Installation Installation is carried out in the reverse order of removal. Check the operation of the front door lock cylinder.
External door handle
Tightening torques: External door handle mounting nuts - 7 Nm. Removal Remove the front door trim or rear door trim. Unscrew the nuts (1). Disconnect the drive rod from the holder (2). Remove: screw (3), outside door...
Tightening torques: External door handle mounting nuts - 7 Nm. Removal Remove the front door trim or rear door trim. Unscrew the nuts (1). Disconnect the drive rod from the holder (2). Remove: screw (3), outside door...
Front door interior handle
Removal Remove: screw(1), interior handle of the front side door. Installation Installation is carried out in the reverse order of removal.
Removal Remove: screw(1), interior handle of the front side door. Installation Installation is carried out in the reverse order of removal.
Front door electric window mechanism
Removal Remove the front door trim. Roll down the window. Loosen the bolts (1). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (2). Disconnect the window lift motor...
Removal Remove the front door trim. Roll down the window. Loosen the bolts (1). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (2). Disconnect the window lift motor...
Front door mechanical window lift mechanism
Removal Remove the front door trim. Roll down the window. Loosen the bolts (1). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (2). Remove the window lift mechanism....
Removal Remove the front door trim. Roll down the window. Loosen the bolts (1). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (2). Remove the window lift mechanism....
Rear door lock retainer
Tightening torques: Rear door lock retainer - 21 Nm. Removal Remove the rear door lock retainer (1). Installation Install the rear door lock retainer. Adjust the rear door lock latch. Check if the door closes tightly....
Tightening torques: Rear door lock retainer - 21 Nm. Removal Remove the rear door lock retainer (1). Installation Install the rear door lock retainer. Adjust the rear door lock latch. Check if the door closes tightly....
Rear door lock
Removal Remove: rear side door trim, support of the guide channel of the rear side door. Disconnect the door opening drive rod (1) from the retainer (2) on the outer door handle. Disconnect: drive rods at point (3),...
Removal Remove: rear side door trim, support of the guide channel of the rear side door. Disconnect the door opening drive rod (1) from the retainer (2) on the outer door handle. Disconnect: drive rods at point (3),...
Rear side door interior handle
Removal Remove: screw (1), interior handle of the rear side door. Installation Installation is carried out in the reverse order of removal.
Removal Remove: screw (1), interior handle of the rear side door. Installation Installation is carried out in the reverse order of removal.
Rear door mechanical window lift mechanism
Removal Remove the rear door trim. Roll down the window. Loosen the bolts (2). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (4). Remove the rear door power window...
Removal Remove the rear door trim. Roll down the window. Loosen the bolts (2). Raise the glass. Secure the glass in the upward position with adhesive tape. Unscrew the nuts (4). Remove the rear door power window...
Rear side door slider mounting
Removal Remove the rear door trim. Partially pull the glass guide groove out of the holder. Loosen the bolts (2). Remove the rear side door guide channel fastening. Installation Installation is carried out in the...
Removal Remove the rear door trim. Partially pull the glass guide groove out of the holder. Loosen the bolts (2). Remove the rear side door guide channel fastening. Installation Installation is carried out in the...
Fastening the front side door slider
Removal Remove the front door trim. Unscrew the bolts (1) from the protective insert without removing it. Partially pull the glass guide groove out of the holder. Loosen the bolts (3). Remove the front side door guide...
Removal Remove the front door trim. Unscrew the bolts (1) from the protective insert without removing it. Partially pull the glass guide groove out of the holder. Loosen the bolts (3). Remove the front side door guide...
Rear side door limiter
Removal Remove the rear door trim. Loosen the bolt (1) of the rear door limiter. Remove the rear door limiter seal (2). Loosen the bolts (3). Remove the rear door limiter through the door frame. Installation...
Removal Remove the rear door trim. Loosen the bolt (1) of the rear door limiter. Remove the rear door limiter seal (2). Loosen the bolts (3). Remove the rear door limiter through the door frame. Installation...
Instrument panel — removal and installation
Important note! To avoid triggering during repairs or work in the immediate vicinity of a pyrotechnic element (airbags and seat belt pretensioners), lock the airbag control unit using the diagnostic tool. In this case,...
Important note! To avoid triggering during repairs or work in the immediate vicinity of a pyrotechnic element (airbags and seat belt pretensioners), lock the airbag control unit using the diagnostic tool. In this case,...
Instrument cluster ventilation nozzle
Removal Using a flat-head screwdriver, remove the decorative ring (1) around the ventilation nozzle. Remove the grilles (2). Remove the inner ring (3). Press the latches (4). Remove the ventilation nozzle. Installation...
Removal Using a flat-head screwdriver, remove the decorative ring (1) around the ventilation nozzle. Remove the grilles (2). Remove the inner ring (3). Press the latches (4). Remove the ventilation nozzle. Installation...
Glove box lid
Removal Remove the rivets (1). Remove the small items compartment lid Installation Replace the small items compartment lid. Secure the small item compartment lid with rivets. Install the rivets (2).
Removal Remove the rivets (1). Remove the small items compartment lid Installation Replace the small items compartment lid. Secure the small item compartment lid with rivets. Install the rivets (2).
Center console — removal and installation
Removal 2 external rear-view mirrors with electrical adjustment. Remove the outside rearview mirror adjustment switch (1). Disconnect the wiring harness from the outside rearview mirror adjustment switch. Remove the...
Removal 2 external rear-view mirrors with electrical adjustment. Remove the outside rearview mirror adjustment switch (1). Disconnect the wiring harness from the outside rearview mirror adjustment switch. Remove the...
Interior rear view mirror
Removal Remove the interior rearview mirror (1). Installation Installation is carried out in the reverse order of removal.
Removal Remove the interior rearview mirror (1). Installation Installation is carried out in the reverse order of removal.
Sun visor — removal and installation
Removal Loosen (1) screw. Remove the sun visor. Remove the sun visor holder (2). Installation Installation is carried out in the reverse order of removal.
Removal Loosen (1) screw. Remove the sun visor. Remove the sun visor holder (2). Installation Installation is carried out in the reverse order of removal.
Handrail — removal and installation
Removal Remove the plugs (1). Loosen the bolts (2). Remove the handrail. Installation Installation is carried out in the reverse order of removal.
Removal Remove the plugs (1). Loosen the bolts (2). Remove the handrail. Installation Installation is carried out in the reverse order of removal.
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Other sections on other Renault models
➽ Body and interior: Interior (internal elements) Renault Megane 1 (1995-2002)
➽ Body and interior: Interior (internal elements) Renault Fluence 1 (2009-2020, petrol)
➽ Body and interior: Interior (internal elements) Renault Logan 2 (2012-2020)
➽ Body and interior: Interior (internal elements) Renault Symbol 2 (2008-2013, petrol)
➽ Body and interior: Interior (internal elements) Renault Sandero 1 (2007-2012, petrol)
➽ Body and interior: Interior (internal elements) Renault Espace III (1996-2002)
Link to this section in different formats
TEXTHTMLBB Code
- User manual
- Governing bodies
- Car driving
- Devices for comfort
- Car care
- Practical Tips
- Power unit
- Petrol engine (K4M)
- Diesel engine (K9K)
- Power system (K4M)
- Power system (K9K)
- Fuel system
- Petrol injection system (K4M)
- Diesel injection system (K9K)
- Starting and ignition system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Drive shafts
- Chassis, running gear
- Front bearing elements
- Rear load-bearing elements
- Steering
- Control devices
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Interior trim
- Interior heating
- Air conditioning
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Governing bodies
- Wipers/washers
- Audio system
- Electrical circuits
