Removing
Remove an upholstery of a forward door.
Lower the glass.
Turn away bolts (1).
Raise the glass.
Secure the glass in the up position with adhesive tape.
Loosen the nuts (2).
Disconnect the power window motor connector.
Remove the power window mechanism.
Installation
Install the power window mechanism.
Connect the power window motor connector.
Set nuts (2).
Install the sliding glass.
Tighten the screws (1), without tightening them.
Raise the glass.
Tighten the screws (1) through openings (3).
Check work.
Install the front door trim.