Removal
Remove the door trim.
Fig. 8.67. Unscrewing the screws
Remove the speaker grille and unscrew screws A (Fig. 8.67).
Disconnect the window lift motor wiring harness.
Fig. 8.68. Removing the window lift slider fastening: 1 – runner fastenings
Disconnect the trim and four window lifter slider fasteners (Fig. 8.68).
Remove the window lift motor.
Installation
Installation is carried out in the reverse order of removal.
Initializing the window lift motor
Turn on the ignition.
Raise the glass to its highest position (the glass rises in jerks).
Hold the switch down for 2 seconds.
Lower the glass to its lowest position.
Hold the switch down for 2 seconds.
The electric motor has been initialized.