Caring for upholstery and carpets Floor mats should be brushed or vacuumed regularly to prevent gravel and sand from accumulating. If the mats are very dirty, remove them, clean or sponge them, and reinstall them after making sure they are dry. Seats...
Removal and installation seats Caution: On models equipped with a seat belt tensioner, the tensioner must be disengaged before attempting to remove the seat (see section Front seat belt tensioner system - general information ). Removal 1. Set the...
Front seat belt tensioner system Most models reviewed in this Manual are equipped with a front seat belt tensioning system. The system provides instant selection of belt slack under sudden axial overloads, significantly increasing the level of...
Front seat safety belts Attention! On models equipped with a seat belt tensioning system, before starting work, read the materials in Section Removal and installation seats . Sedan and hatchback models 1. Disconnect the negative cable from the...
Rear seat safety belts Hatchback models 1. Remove the luggage compartment shelf. 2a. Fold the rear seats down and disconnect the electrical wiring from the rear speaker on the side of the belt to be removed. Remove the screws securing the...
Removal and installation of interior trim elements 1. Screws and various types of fasteners are used to attach interior trim panels (usually of the clamp or pin type). 2. Make sure that the panel to be removed is not covered by any other trim element. Usually, the order...
Removal and installation the center console Removal 1. Disconnect the negative cable from the battery. 2. On models with rear power windows, remove the window control switch panel from the rear section of the center console. 3. On models with manual rear windows,...
Removal and installation the instrument panel assembly Before you begin removing the instrument panel, mark the electrical wiring connectors to be disconnected. When reassembling, the harnesses must be threaded through the previous through-holes! Removal 1. Remove the...