Duster Fluence Kangoo Laguna Logan Megane Sandero Scenic Symbol Clio Other

Interior (internal elements) of the car Renault Scenic 1

Front Pillar Trim/Cover — Removal and Installation
The pillars of the car in order from front to back are designated by the letters A, B and C, respectively, front, middle and rear. Removal 1. Remove the door seal near the pillar trim. 2. Carefully release the trim from...

Door sill trim — removal and installation
Removal 1. Remove the cover of the middle rack (rack B). 2. Unscrew bolt A, disconnect fasteners B and remove the seat belt (see illustration). 27.2 Unscrew bolt A, disconnect fastenings B and remove the seat belt 3....

Rear trim of the sedan body
The order of removal and installation of the trim depends on which part needs to be removed. In any case, the following sequence of dismantling must be followed. Removal 1. Open the trunk lid and partially remove the...

Rear trim of the coupe body
Removal 20. Remove the door opening seal near the B-pillar. 21. Remove button 1 of the seat belt height adjuster using a flat-head screwdriver (see illustration). 28.21 Remove button 1 of the seat belt height adjuster...

Trunk lining — removal and installation
Cars with a body "sedan", "coupe" Removal 37. Lift the spare wheel tray cover. 38. Unscrew the three screws 1 securing the cover and release the cover from the clips by pushing it upwards (see arrows in the...

Glove box lid — removal and installation
Removal 43. Open the glove compartment lid and disconnect the fasteners of both lid suspension rods by slightly pressing the fastener cores. 44. Remove the cover from the hinges by pressing them with a screwdriver (see...

Center console — removal and installation
The centre console needs to be removed, for example, to provide access to the airbag and seat belt tensioner control unit. Removal 1. Remove the ashtray from the parking brake lever cover. In MEGANE cars with a "coupe"...

Seat belt tensioner
The belt tensioner is installed on the front seats (see illustration 30.0). 30.0 The belt tensioner is installed on the front seats: 1 - seat belt height adjuster 2 - belt tensioner with explosive charge 3 - lap seat...

Front seat — removal and installation
Attention! Before performing work, read the safety precautions regarding seat belt tensioners. Considering that the RENAULT company requires that before connecting a disconnected belt tensioner, it is necessary to check...

Rear seat — removal and installation
Removal 22. Raise the rear seat and unscrew the hinge mounting bolts. 23. Remove the rear seat. 24. Unscrew the three bolts A (left, right and center), which the seat back is attached to (see illustration). 31.24...

This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

Share with friends:

Other sections on other Renault models

➽ Body and interior: Interior (internal elements) Renault Megane 1 (1995-2002)
➽ Body and interior: Interior (internal elements) Renault Fluence 1 (2009-2020, petrol)
➽ Body and interior: Interior (internal elements) Renault Logan 2 (2012-2020)
➽ Body and interior: Interior (internal elements) Renault Symbol 2 (2008-2013, petrol)
➽ Body and interior: Interior (internal elements) Renault Duster 1 (2009-2017)
➽ Body and interior: Interior (internal elements) Renault Sandero 1 (2007-2012, petrol)

Link to this section in different formats

TEXTHTMLBB Code