Removing
Remove the door trim.
Pic. 8.73. Removing the window seal
Disconnect the outer window sill seal at points A and B using a special tool (Sag. 1363) (pic. 8.73).
Pic. 8.74. Removing the inner window seal
Remove the inner window seal (pic. 8.74).
Pic. 8.75. Removing the guide groove: 1 - groove
Loosen the screws and remove the guide groove of the fixed glass pillar (pic. 8.75).
Detach the front part of the seal.
Pic. 8.76. Removing the upper holder of the double seal: 1 - holder
Detach the upper holder of the double seal (pic. 8.76).
Remove the knot from the door «gasket assembly with fixed glass».
Installation
Install Node «gasket assembly with fixed glass» on the door.
Pic. 8.77. Fixing the inner surface of the seal: 1 - seal
Fix the inner surface of the seal (pic. 8.77).
Insert the seal into the corner and slide it behind the door panel.
Install the remaining components in the reverse order of removal.