Removing
Follow the security shutdown procedure.
Attention! Improper installation of the wheels in relation to the steering wheel can lead to the destruction of the contact disk.
Remove the driver front airbag.
Set the wheels to the straight ahead position.
Disconnect the connectors.
Remove the bolt (1) steering wheel mountings.
Attention! To ensure reliable operation of these electronic systems, do not damage the connector locking devices.
Remove the steering wheel.
Attention! To avoid damaging the contact disk, do not turn the moving part of the contact disk.
Installation
Parts that must be replaced: Steering wheel bolt.
Attention! To prevent damage to the steering column and steering wheel, align the orienting elements of the steering column and steering wheel.
Install the steering wheel.
Connect the connectors.
Install a new steering wheel bolt.
Torque tighten the new steering wheel bolt (44 Nm).
Install the driver front airbag.
Turn on the ignition.
Check the operation of the contact disk:
- turn the steering wheel to the extreme left position,
- turn the steering wheel to the extreme right position,
- check that there is no error message displayed on the instrument panel.