Exhaust emission control system Strict requirements for the composition of exhaust gases imposed on cars have led to the use of devices that reduce the harmfulness of exhaust to a minimum. The described system includes an exhaust gas catalytic...
Repair of the exhaust gas toxicity reduction system Catalytic Converter and Exhaust Oxygen Sensors The condition of the catalytic converter can be checked with a properly calibrated gas analyzer. Before determining the condition of the converter, it is necessary to check...
Exhaust system — general information The exhaust system consists of two sections: downpipe with catalytic converter; rear part, which includes a resonator, muffler and exhaust pipe. Figure 3.116. Downpipe connection to the rear of the system The entire...
Silencer repair Exhaust pipe of monobloc design, i.e. it does not have detachable connections to the muffler. If it is necessary to replace the main or auxiliary muffler (Spare parts are supplied separately) put two marks on the pipe...
Exhaust system disassembly Place the vehicle on a lift or overpass. Remove the protective casing of the power unit. Removing the exhaust pipe and catalytic converter Withdrawal: trace the wiring to the oxygen concentration sensor in the exhaust...
Catalytic converter — removal and installation The catalytic converter is a reliable and simple device that does not require maintenance, but there are some points the owner should pay attention to in order to extend the life of the converter. The catalytic...