- inlet pipe with catalytic converter;
- the rear section, which includes the resonator, muffler and exhaust pipe.
Figure 3.116. Connecting the intake pipe to the rear of the system
The entire length of the system is suspended on rubber brackets. The inlet pipe is connected to the rear part by a conical ring seal, tightened with a clamp (Figure 3.116).
Attention:
- When the vehicle is moving, the catalytic converter of the exhaust gases heats up to a high temperature. Do not park the vehicle in places where flammable materials are located.
- Do not work on the exhaust system until it has cooled.
- The seal between the exhaust manifold and the catalytic converter must be perfect.
- All exhaust system gaskets are single use only.
- When removing/installing the neutralizer, do not allow it to be mechanically damaged.