Adjusting the seat position
To move the seats forward or backward, lift the crossbar 1 to unlock the mechanism.
Adjusting the backrest angle of the seats
Press handle 2 until you reach the desired seat back angle.
The rear seat can be folded towards the front seats.
Move forward one of the two levers 1 located on the right and left sides of the bench seat.
Before folding the rear seat with a one-piece backrest and cushion, unfold the center seat belt on it.
Before folding the rear seat with a two-section backrest and cushion, remove the center head restraint, set the left and right head restraints to the lower position, then fold the smaller part of the seat, then the larger part.
You can find the original at this link: www.RENAULTBOOK.ru
Move the seat cushion forward by pulling the two rings 2 one after the other.
Adjust the cushion and seat to an upright position.
After returning the seat to its original position, make sure the head restraints are adjusted correctly.
When transporting large loads, you can fold either a larger or smaller portion of the rear seat.
To secure the rear bench seat in the vertical plane, attach belt 2 to the passenger headrest rod.