Share with friends:
Car engine cooling system Renault Logan 1
Description of the design of the cooling system
Engine cooling system liquid (with forced circulation of liquid), sealed, with expansion tank. The system is filled with ethylene glycol based liquid (antifreeze), non-freezing at ambient temperatures down to –40°C....
Engine cooling system liquid (with forced circulation of liquid), sealed, with expansion tank. The system is filled with ethylene glycol based liquid (antifreeze), non-freezing at ambient temperatures down to –40°C....
Possible malfunctions of the cooling system
Possible malfunctions of the cooling system, their causes and methods of elimination
Possible malfunctions of the cooling system, their causes and methods of elimination
Removal and installation the expansion tank
You will need: a 10 mm socket head, an extension, pliers, and a container for draining the coolant from the expansion tank. 1. Squeeze the clamp of the steam outlet hose with pliers and slide it along the hose. 2....
You will need: a 10 mm socket head, an extension, pliers, and a container for draining the coolant from the expansion tank. 1. Squeeze the clamp of the steam outlet hose with pliers and slide it along the hose. 2....
Removal and installation the electric fan of the radiator of the cooling system
1. Remove the power steering fluid reservoir from the bracket and carefully move it to the side. 2. Open the holder and remove the power steering fluid reservoir hose from it. 3. Open the air conditioner compressor tube...
1. Remove the power steering fluid reservoir from the bracket and carefully move it to the side. 2. Open the holder and remove the power steering fluid reservoir hose from it. 3. Open the air conditioner compressor tube...
Replacing the cooling system radiator
You will need: 7 mm wrenches, TORX T30, 10 mm socket head, pliers. 1. Drain the coolant (see "Replacing the coolant" ). 2. Remove the front bumper (see "Removing and installing the front bumper" ). 3. Remove the two...
You will need: 7 mm wrenches, TORX T30, 10 mm socket head, pliers. 1. Drain the coolant (see "Replacing the coolant" ). 2. Remove the front bumper (see "Removing and installing the front bumper" ). 3. Remove the two...
Replacing the water pump
Remove the pump for repair or replacement if it produces noise during operation that exceeds the normal level and coolant leaks. Disassembling the pump is quite a labor-intensive job, so if it malfunctions, we recommend...
Remove the pump for repair or replacement if it produces noise during operation that exceeds the normal level and coolant leaks. Disassembling the pump is quite a labor-intensive job, so if it malfunctions, we recommend...
Removal and installation the thermostat
The need to remove the thermostat may arise for its replacement if the engine temperature is unstable: overheating or insufficient heating. To check the thermostat on a car, start a cold engine and touch the lower...
The need to remove the thermostat may arise for its replacement if the engine temperature is unstable: overheating or insufficient heating. To check the thermostat on a car, start a cold engine and touch the lower...
This section is available on: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
Other sections on other Renault models
➽ Power unit: Cooling and lubrication system Renault Fluence 1 (2009-2020, petrol)
➽ Power unit: Cooling system Renault Laguna 2 (2001-2007)
➽ Power unit: Cooling system Renault Megane 1 (1995-2002)
➽ Power unit: Cooling system Renault Espace I and II (1984-1996)
➽ Power unit: Cooling system Renault Duster 1 (2009-2017)
➽ Power unit: Cooling and lubrication system Renault Symbol 1 (1999-2008, petrol)
Link to this section in different formats
TEXTHTMLBB Code
- General information
- Faults en route
- Daily checks
- Governing bodies
- Maintenance
- Power unit
- Petrol engines 1.2 l
- Petrol engines 1.6 l
- Diesel engines 1.5 l
- Cooling system
- Lubrication system
- Power and control system
- Intake and exhaust system
- Engine electrical equipment
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis, running gear
- Suspension and wheels
- Brake system
- Steering
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Safety system
- Heating and air conditioning
- Electrical equipment
- Equipment and devices
- Wiring diagrams (sedan)
- Wiring diagrams (wagon)
- General information
- Vehicle device
- User manual
- Faults en route
- Daily maintenance
- First maintenance
- Second maintenance
- Driver tips
- Power unit
- Engine repair
- Lubrication system
- Cooling system
- Power and exhaust system
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis, running gear
- Front suspension
- Rear suspension
- Steering
- Brake system
- Wheels and tires
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Body Care
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits