Description of the design of the lubrication system The engine lubrication system is combined: the most loaded parts are lubricated under pressure, the rest - by spraying. The pressure in the lubrication system is generated by a gear oil pump installed in the engine oil...
Replacing the oil pump drive chain and gear 1. Disconnect the wire from the terminal «minus» battery. 2. Drain the oil from the engine oil sump (see «Changing engine oil and oil filter» ). 3. Remove the accessory drive belt (see «Replacing accessory drive belts»...
Removal and installation of the oil pump The oil pump is removed for repair when its supply is reduced, causing a constant drop in oil pressure in the engine lubrication system. You will need socket heads «on 10» and «at 13». 1. Disconnect the wire from the...
Oil pump repair You will need: TORX T30 wrench, pliers, caliper, set of flat feeler gauges. 1. Remove the oil pump from the car (see «Removal and installation of the oil pump» ). 2. Drain the oil from the pump. 3. Turn out five screws...